Hello, I recently made an FN-Scar Light...and it probobly turned out meh, bad, HORRRIBLE. All I know is I can do better :o
So Comment below your rating and suggestions "Example: 2.3/5 Stars and *Suggestions* I need dem suggestions to improve :J
The spoiler shows the old version there's now a new one.
Spoiler:
FN-Scar L FN Scar-L.jpg (80.56 KiB) Viewed 5631 times
smg.kv6
FN-Scar L Download (3.32 KiB) Downloaded 182 times
New Improved:
Picture:
Download:
smg.kv6
FN-Scar 7.11 Download (3.26 KiB) Downloaded 221 times
Re: FN-Scar L Needing Suggestions..
Posted: Sun Jul 07, 2013 10:16 pm
by Zekamalikyd
5/5 would rate again
k 4.5/5
Re: FN-Scar L Needing Suggestions..
Posted: Mon Jul 08, 2013 7:26 am
by Ozone
7.5/10 not as bad as you think
my advice is redo the stock make the ejection port smaller and lastly curve the mag
Re: FN-Scar L Needing Suggestions..
Posted: Mon Jul 08, 2013 10:35 am
by MrHaaax
Ozone wrote:7.5/10 not as bad as you think
my advice is redo the stock make the ejection port smaller and lastly curve the mag
Also, adjust the magazine insert. Make it thicker.
Also, grip is a bit too thick and short.
Add more depth(less cardboard-ish/less square-ish/more rounder)
Otherwise, 7/10
Re: FN-Scar L Needing Suggestions..
Posted: Wed Jul 10, 2013 9:17 am
by duck_norris
Meh, could be better, but pretty nice.
Re: FN-Scar L Needing Suggestions..
Posted: Wed Jul 10, 2013 8:32 pm
by Mr.CS
duck_norris wrote:Meh, could be better, but pretty nice.
Thanks, I'm going to work on this now I kinda forgot about this lol
Re: FN-Scar L Needing Suggestions..
Posted: Wed Jul 10, 2013 10:01 pm
by Mr.CS
MrHaaax wrote:
Ozone wrote:7.5/10 not as bad as you think
my advice is redo the stock make the ejection port smaller and lastly curve the mag
Also, adjust the magazine insert. Make it thicker.
Also, grip is a bit too thick and short.
Add more depth(less cardboard-ish/less square-ish/more rounder)
Otherwise, 7/10
Alright I made a new one. also I admit it does look like cardboard now that you say it xD Is this a bit better? And yes I notice the missing color block that's not gray.
FN-Scar-L slab6 2013-07-10 17-59-50-14.jpg (30.76 KiB) Viewed 5511 times
Re: FN-Scar L Needing Suggestions..
Posted: Thu Jul 11, 2013 2:37 am
by MrHaaax
Mr.CS wrote:
MrHaaax wrote:
Ozone wrote:7.5/10 not as bad as you think
my advice is redo the stock make the ejection port smaller and lastly curve the mag
Also, adjust the magazine insert. Make it thicker.
Also, grip is a bit too thick and short.
Add more depth(less cardboard-ish/less square-ish/more rounder)
Otherwise, 7/10
Alright I made a new one. also I admit it does look like cardboard now that you say it xD Is this a bit better? And yes I notice the missing color block that's not gray.
slab6 2013-07-10 17-59-50-14.jpg
It's much better, but the magazine is wierd.
Re: FN-Scar L Needing Suggestions..
Posted: Thu Jul 11, 2013 5:31 am
by Ozone
yea mag is sorta wierd can you make a link?
Re: FN-Scar L Needing Suggestions..
Posted: Fri Jul 12, 2013 11:10 am
by Mr.CS
Ozone wrote:yea mag is sorta wierd can you make a link?
